Configure Your Mac OS X 10.6 Device Settings for XFINITY Internet

Follow these easy steps to get started.

Steps to Configure

  1. From the Apple icon menu, select Location then Network Preferences.
    Apple icon menu: Location  > Network Preferences.
  2. In the Network window, select Ethernet.
    Ethernet Connected icon

    Network screen with location set to Automatic; Configure IPv4 is set to Using DHCP.
    • Confirm that Location is set to Automatic.
    • Confirm that Configure IPv4 is set to Using DHCP. (The IP Address, Subnet Mask, etc. will populate once the connection has been established.)
    • Click Apply (if needed).
    • Click the Advanced button to open a new window for additional settings.
      Advanced button
    • Next, click the TCP/IP tab, and confirm that Configure IPv4 is set to Using DHCP.
      Ethernet page with Cinfigure IPv4 set to Using DHCP and TCP/IP selected
    • Then click the Ethernet tab.
      Ethernet page with Ethernet tab selected
    • Confirm that Configure is set to Automatically.
      Configure field is set to Automatically.
    • Click OK to save settings
  3. Close the Network window to complete the changes.

Find this article at:

Was This Article Helpful?

Rate this article on a scale of 1 - 5

Related Articles

Need more help? We're on it.

Find an XFINITY Store or service center near you.